MIMAKI JV5-130S Dokumentacja Pobierz pdf (Strona 211)

5-23

Troubles for which error messages are displayed

∗∗∗∗ ERROR 160 ∗∗∗∗

NCU DETECT 03

An error occurred in the control sys-

tem.

Printing can be resumed after turning

off the nozzle missing detection func-

tion. Turn on the nozzle missing detec-

tion function again before starting to

print the next and subsequent print

files.

If the error occurs frequently, contact

your local distributor to call for ser-

vice.

∗∗∗∗ ERROR 160 ∗∗∗∗

NCU DETECT 04

An error occurred in the control sys-

tem.

∗∗∗∗ ERROR 161 ∗∗∗∗

NCU EXCHANGE

An error occurred in the control sys-

tem.

Operation can be resumed.

If the error occurs frequently, contact

your local distributor to call for ser-

vice.

∗∗∗∗ ERROR 161 ∗∗∗∗

NCU CONSUMPTION

An error occurred in the control sys-

tem.

Turn off the power to the printer and

turn it on after a while. If the same

error message appears again, contact

your local distributor to call for ser-

vice.

Operation can be resumed after turning

off the nozzle missing detection func-

tion.

∗∗∗∗ ERROR 162 ∗∗∗∗

NCU LINE VOLTAGE

An error occurred in the control sys-

tem.

∗∗∗∗ ERROR 163 ∗∗∗∗

NCU SENSOR

An error occurred in the control sys-

tem.

Operation can be resumed.

If the error occurs frequently, contact

your local distributor to call for ser-

vice.

∗∗∗∗ ERROR 163 ∗∗∗∗

NCU SENSOR DETECT

An error occurred in the control sys-

tem.

Turn off the power to the printer and

turn it on after a while. If the same

error message appears again, contact

your local distributor to call for ser-

vice.

Operation can be resumed after turning

off the nozzle missing detection func-

tion.

∗∗∗∗ ERROR 164 ∗∗∗∗

NCU FPGA ERROR

An error occurred in the control sys-

tem.

∗∗∗∗ ERROR 200 ∗∗∗∗

HEAD MEMORY (----)

An error occurred in the circuit board

system.

Turn off the power to the printer and

turn it on after a while. If the same

error message appears again, contact

your local distributor to call for ser-

vice.

∗∗∗∗ ERROR 201 ∗∗∗∗

BACKUP MEMORY

An error occurred in the circuit board

system.

∗∗∗∗ ERROR 201 ∗∗∗∗

BACKUP DATA

An error occurred in back-up data. The continued use is possible.

If the error message appears fre-

quently, please call for services.

∗∗∗∗ ERROR 202 ∗∗∗∗

DEVICE CONSTRUCTION

An error occurred in the control sys-

tem.

Contact your local distributor to call

for service.

Press the [ENTER] key to display the

details of the error. Press the [ENTER]

key again to enable the system to be

started after changing the configura-

tion to a supported one. (See 5-13)

Error message Cause Remedy

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 291 292

Komentarze do niniejszej Instrukcji

Brak uwag